“Lee.” Leon stood in the doorway, expectant. He didn’t need to say anything else, Lee knew what he wanted.
He turned his head towards the man, tipping his chin up in acknowledgement.
“Now,songbird,” Leon murmured, holding his hand out and beckoning the boy to him. “Say goodnight to your friends, you’ll see them tomorrow morning.”
Lee didn’t say anything, but he did shakily begin to walk towards the former senator.
Lev jolted forward, held back by a guard Lee knew was cruel by nature. He wanted to tell him to stop, that it was okay - it wasn’t, it wasn’t okay, Lee didn’t wantthis - but his words caught in his throat and if he tried to force them out past the lump in his throat he was sure his partner would only fight harder.
Marco had set Graham onto the bed, tearing away his shirt since they hadn’t given him any shears to cut away the clothing.
Lee watched his husband release a sob, hands stained red with their partner’s blood, but Marco didn’t get up from the bed. They knew how this worked; they got things for being good.
always thinking about the production of hamlet i saw at the pop up globe a couple of years ago where everyone was costumed in typical shakespearean dress and the set was fairly minimal BUT! they gave polonius an iphone. it was like a running gag that his ringtone kept going off when hamlet or claudius were trying to speak and they would get more and more impatient with him every time. the cast had perfect comedic timing and it was such a perfect modernisation of typical shakespeare humour
but oh my God. the nervous laughter that rippled through the audience when his phone went off behind the tapestry. the heavy silence that followed, interrupted only by the incessant chime of polonius’ ringtone and a muffled “shit, shit!” while he tried to decline the call. it keeps ringing even after hamlet has already put his sword through him. hamlet picks it up in his bloody hands and ends the call, puts it back in polonius’ grasp before turning back to face gertrude.
hands down the best set up and pay-off of any addition to a shakespeare play i have ever witnessed
There have been some other websites who have stolen my original Talkbox FAQ that I wrote back in 2007-2008, with no credit to me…So I thought it was about time that I repost it myself, since my old site no longer exists.
Here is the OFFICIAL Moot Booxle Talkbox FAQ.
MooT BooXLe’s TALKBOX FAQ
1. What is the purpose of this FAQ? 2. What is a talkbox? 3. Is a talkbox the same as a vocoder? 4. What is a talkbox driver? 5. I built a “ghetto talkbox”. Why doesn’t it work very good? 6. It’s easier and cheaper just to buy a talkbox, right? 7. What kind of driver do I need for building a good talkbox? 8. How loud should I play my talkbox? 9. What is the proper length of tubing? 10. What is the proper size of tubing? 11. How should I position the tube in my mouth? 12. How come my words aren’t clear? 13. What kind of tone do I need for my keyboard? 14. Do I have to have a Yamaha DX100? 15. If the sound comes from the tube, why do I need a microphone? 16. Will playing the talkbox damage my mouth or dental work? 17. Can you teach me how to play “California Love”?
1. What is the purpose of this FAQ? The purpose of this FAQ is not to necessarily dictate what’s right and wrong about the talkbox, playing the talkbox, etc. but instead to provide some good general information. Over the past year, I have received dozens, if not hundreds, of emails asking a lot of the same questions. My intent is to make a document that people can refer to that should answer most, if not all, of those questions.
2. What is a talkbox? Let’s start with the basics. A talkbox is not really an instrument in and of itself; however, it requires such skill that it can almost be classified as such. A talkbox is a sound modifying device that uses the human vocal cavity - not the human voice - as its controller. When a sound is fed into a talkbox driver, that sound travels through an airtight vinyl tube which is placed in the performer’s mouth. The shape of the sound can then be modified by the performer by moving his or her mouth and throat as if he or she were singing or talking. Some performers have perfected this to such a high level that very clear and distinct words and phrases can be heard - all with the tone and pitch of the instrument being played. Notable among them are Roger Troutman (some, including myself, still consider him the best!), Jeff Beck, Peter Frampton, Pete Drake, Stevie Wonder (briefly), Byron Chambers, Teddy Riley, Joe Walsh, etc.
3. Is a talkbox the same as a vocoder? While they may seem similar, the answer is NO. True, both can make ‘talking synth/guitar’ sounds, but they are are two completely different animals. A vocoder is an electronic device that consists of a network of tuned bandpass filters, each one connected to an envelope follower. It requires two input signals - a “carrier” and a “modulator”. The “carrier” signal would be your guitar, keyboard, or whatever else (sometimes it’s fun to use a drum machine!), and the “modulator” in this case would be your voice talking/singing into a microphone. The different frequencies in the sound of your voice pass through the bandpass filters, which trigger the envelope followers to let the sound of the “carrier” through in that frequency range. The result is that the “carrier” now has the characteristics of your voice - the “modulator”. Sounds complicated….probably because it is. Hardware vocoders, especially the higher-quality ones, can be quite expensive. A talkbox, on the other hand, is very simple and relatively inexpensive. It relies on basic physics rather than complicated electronics, and is no more complex than a guitar amplifier. Rather than actually talking or singing into a microphone to modify the instrument sound, with a talkbox, the instrument sound is directly injected into the mouth. This natural physical phenomenon makes the talkbox capable of much richer and more realistic vocal sounds, whereas the vocoder is better at special effects and robotic vocal sounds.
4. What is a talkbox driver? When somebody refers to a ‘talkbox driver’, what they mean is a horn driver, also known as a compression driver. This is a common PA speaker part. Most full-range PA speakers consist of at least one woofer (usually between 10" and 15" in size) and a horn, which handles the mid to high frequencies. If you were to take this speaker apart, you would see a compression driver attached to the back of the horn - which just screws on to the throat of the driver. For talkbox use, there are several models (which I’ll mention later) that are preferred. Not just any horn driver will give a good result - it all depends on the frequency response and power handling of the driver.
5. I built a “ghetto talkbox”. Why doesn’t it work very good? Oh boy. You had to go asking that question. Well…..the biggest reason that a “ghetto” talkbox will never sound as good as the real thing is because it does not use a real horn driver - the key component of a “real” talkbox. Is it fun to build? Oh yeah! Because you probably have most of the parts lying around your house! Does it sound good? Probably not. Can it sound good? Not really. The way I made mine sound decent on the videos was through a ton of post-processing (EQ and compression). Straight out, it certainly does not sound that good! You are most likely going to get a weak-sounding talkbox that leaks sound very badly - no matter how tight you tape or seal it! The only way to get a completely airtight seal is to use a horn driver, period.
6. It’s easier and cheaper just to buy a talkbox, right? Easier, yes. Cheaper, not at all. You can certainly build a talkbox, including amp, driver, tubing, connectors, and wire, for less than it costs to buy a good pre-made talkbox. However, if you don’t want to spend the time and effort, and want a decent pre-made box, I have a couple of suggestions. First of all, stay AWAY from the Danelectro Free Speech. There are about a million reasons why this is the worst talkbox in history, starting with the special tube design that only sort of works. Also, there is really no need to go for a 'Supertalker’ talkbox, as those use MCM drivers which can be bought for less than $40 USD! The only thing that makes them nice is the custom tube connectors, but last time I checked, they actually sell those separately. I would recommend the Framptone talkbox, endorsed by Peter Frampton, but you pay an awful lot for the name. Not necessary. The Heil sound talkbox is pretty decent, but there are drivers out there that are certainly better. The one to go for, especially for a beginner, is the Rocktron Banshee. It’s self-amplified, self-contained, and has a pretty good sound. Great for starters.
7. What kind of driver do I need for building a good talkbox? When shopping for a horn driver for use as a talkbox, there are a couple of things you should look for. First of all, check out the frequency response. It needs to be a midrange driver - a high frequency driver will not work very well. The low frequency response needs to be at least 600Hz or lower - I recommend much lower. Look for one that goes down to at least 250Hz. The aforementioned MCM driver (model DU-40) goes all the way down to 100Hz! The high frequency response may vary, but generally around 6-8kHz is fine. The other thing to check out is the power handling - the wattage. About 40w is plenty - it’s not a good idea to use your talkbox at extremely loud volumes. If the driver can handle more than 40w, great. More headroom is not a bad thing! You may also want to bear in mind the impedance (ohms) of the driver - most horn drivers are either 8 or 16 ohms. It’s always a good idea to match the impedance between your amp and driver. Here are some of the driver models that are best for talkbox: Electro-Voice 1823m (This is the classic 'Golden Throat’ driver) Electro-Voice 1824m (a smoother-sounding version of the 1823m) MCM DU-40 (the best low frequency response!) MCM 54-060 (the 60w version of the DU-40) Pyle Pro PDS 772 (a nice clean-sounding driver) Selenium D250-X Monacor KU-516
8. How loud should I play my talkbox? My general rule is, how loud can you sing or talk (not screaming)? That is about the maximum volume you should run your talkbox at, too. While it may not really hurt you to play it louder, remember that the human mouth and throat were only designed to handle a certain amount of sound pressure. Putting something that sounds like a jet taking off in your mouth is not a good idea! Playing the talkbox at low volumes is ok to do, but you may find that you can’t really make certain sounds until you open the driver up more - so put a decent volume through it! Also, when recording, talkboxing at low levels can make your mouth noises more obvious.
9. What is the proper length of tubing? There really is no rule here. In my opinion, shorter is better, because it allows more sound pressure to reach your mouth from the driver. You may find that very long tube lengths reduces the effectiveness of your talkbox, making you have to turn the volume up, and adjust the EQ of your amp to have a more robust sound. The bottom line is, use only what is necessary to get the sound from the driver to your mouth, with the talkbox sitting on the floor.
10. What is the proper size of tubing? Once again, there really is no rule, but the two sizes that are most commonly used (and the only two sizes that I recommend ever using) are: 5/8" O.D. (outside diameter) and ¼" O.D. The most common size is the ¼" OD, and that is what I recommend to beginners - it is easier to get clear diction with that size of tube in your mouth. In the US, you should be able to find WATTS plumbing parts at any home supply store. Get the yellow color-coded tubing. Buy plenty - you will always want to have extra, because it’s a good idea to change out your tubing once in awhile. The larger size, 5/8" OD, is nice for a fatter tone, because more air goes through the tube, and just the physics of a larger column of air yields a slightly different harmonic balance. I find this size harder to talk with, but after some practice it becomes more natural. Find which size works for you, and get comfortable with it! Another note about tubing: don’t use the cheapo tubing that is used in commercial drink machines. My friend DJ Mpact found this out the hard way! The cheaper, more flexible vinyl tubing tends to transfer vibrations much more intensely, which could result in an intense headache! Use nice quality plumbing-grade vinyl tubing.
11. How should I position the tube in my mouth? There is no rule about which side of the mouth to use, but most tend to go for the left side, which is what I do. Hold the tube gently between your molars, biting it ever so slightly so it doesn’t slip out of your mouth, but not so hard that it chokes off the sound coming through it. You may have to angle it a bit away from or toward your cheek, depending on your mouth shape. Some trial and error is involved here, just changing the position and seeing what works. Once you find the right position, you will be surprised how quickly it becomes instinct to put the tube in your mouth in that spot.
12. How come my words aren’t clear? There are many reasons for this. It could be that the tone you are getting from your keyboard or guitar is not bright enough - that is, not rich enough in harmonics. The brighter and 'buzzier’ the tone coming into the driver, the easier it is to sound clear with the voice - in most cases. This would mean that if you are playing guitar, adding a little distortion and using the bridge position pickup; with a keyboard, use a bright, harmonic sound such as a sawtooth - this is addressed in detail in question 13. The biggest reason why words aren’t clear is bad tube placement, bad pronunciation, and not adding in the consonant sounds. Try whispering the words “take a break”, but do it without actually exhaling any air. Notice something? The only sounds you hear are the ’t’, 'k’, and 'b’. This is because those consonant sounds are not made by your voice or breath - they are made by your lips and tongue
