**Warrior Peach WIP**⠀

Again thanks for all those who joined the stream the other day! I didn’t feel too productive, but that might be my anxiety hahaa.⠀

The two things I worked on the stream were forming the bracers, as well as the leg armor. For the leg armor I did the same process of wrapping my leg up in plastic wrap and masking tape, then guestimating where things will sit on my legs. One problem facing is my legs are both thicker, and smaller than the ref images.⠀

I also heated up the armor with a heat gun to begin shaping it. I did get to learn how much heat that L200 works well with. (I also learned I cant use masking tape on it or it will actually rip away the foam ug.) One fun thing I did was kept trying with my heat tool what kinda ways I could put the divits or cuts into the armor. The one angular tool at high heat will work SUPER WELL for cuts once I get to that part of the armor! I’m looking forward to damaging it once everything is done.

**Warrior Peach WIP**⠀

No stream last night because I was over doing some mutual babysitting with some cos-buddies! ⠀

While we were hanging I decided to get a jump on cutting out the foam for the bracers. This was done by first tracing out everything twice with a marker on the foam, keeping careful consideration to flip one side for the right bracer.⠀

This was my first time working with L200, and I’ve only worked with craft before. It’s a soft foam, and it appears very porous on the inside which I thought was interesting. But I didn’t have any resistance to my fresh exactoknife (really need a bigger one.) Like its sensitive, yet firm all at the same time. I’m not sure /how/ to describe it.⠀

Once the pieces were cut out, I used contact cement on the inside seams, let that dry, and then made sure to stick it together at my seam markers. And viola! Two sides of two bracers each! Need to clean up the seams a bit, carve me some divits, and then plot how I’m going to attach them, but so far so good.⠀

Warrior Peach WIP

I’m finally getting started on the Warrior Peach by @skirtzzz! It’s going to be a task since I’m very unhappy with both my mental state and my body at the moment, but you know what gonna press through cause I want to cosplay this dammit.

The first task before me was getting the bodysuit ready before I felt prepped to do the armor. Since I can’t wear a bra, I’m trying these Silicone Breast lifts from Hiramex (found on Amazon) to at least help with boob movement underneath the armor. Even though I have heavy cups they are really doing a great job at least reducing boob rash!

With that done I started making a guesstimate on the bodysuit. With some excess spandex from other projects I used the bodysuit pattern from Kwiksew to give me a high collar suit and just didn’t cut out the full legs. Way more fabric than needed, but gave me a starting point. From there I marked off where I wanted to cut away fabric, and then slowly trimmed and reshaped. With my first draft done, I re-cut it from new fabric and re-sewed. To be honest I’m super happy with draft 2, but I’m having crotch issues so I’m going to go with one more final draft and then think about cutting the full suit.

You know I had to do it to em

i am one (1) chris pratt casting away from losing my mind

Yahoo! Happy Mario Day ⭐️

YAHOO!

Happy Mario Day ✨

What’s your favorite Mario game?? Mine is hands down Mario 64 and Super Mario Galaxy⭐️

here’s my six fan arts btw